INSTALLATION INSTRUCTIONS for IKI SAUNA HEATERS

INSTALLATION INSTRUCTIONS for IKI ELECTRIC HEATERS

Bear in mind that only a licensed electrician is allowed to install an electric sauna heater.

IKI Pillar 6,6-9 kW Electric Heaters [PDF] >

IKI Corner and Wall 6-9 kW Electric Heaters [PDF] >

PHYSICAL INSTALLATION INSTRUCTIONS for IKI ELECTRIC HEATERS

Electric Heaters 6-6,6 kW with Fixed Control Unit [PDF] >

Electric Heaters 6-6,6 kW with UKU Wifi Control Unit [PDF] >

Electric Heaters 9 kW with Fixed Unit [PDF] >

Electric Heaters 9 kW with UKU Wifi Control Unit [PDF] >

UKU Wi-Fi CONTROL UNIT

Installation Instructions for UKU Wi-Fi Control Unit >

HOW TO INSTALL AN IKI WOOD-BURNING HEATER INTO A CHIMNEY PIPE

How to install an IKI wood-burning heater into a chimney pipe 

GENERAL INSTRUCTIONS for IKI SAUNA HEATERS

The heating time of an IKI sauna heater is approximately 60-75 minutes to get the sauna stones ready. This can vary depending on the starting temperature and the ventilation of the sauna room. Recommended temperature for entering a sauna with an IKI heater is approximately 131-167F (55-75C). After that you can increase the temperature of the sauna by adding water to the heater. Pouring water on the heater increases temperature and humidity. You can control the heat and humidity by pouring the water to different parts of the heater. You can adjust the feel of the heat and steam from soft to sharp by poring water either to the side of the heater or on top of the stones at different places.

Read More IKI Instructions >

SAUNA BUILDER GUIDE

TEST WHICH SAUNA HEATER MODEL IS RIGHT FOR YOU

Find the right heater for your sauna in 5 minutes

Enter

keywords