HOW TO INSTALL AN IKI WOOD-BURNING HEATER INTO A CHIMNEY PIPE

We get a lot of questions about how to install an IKI heater into a chimney pipe and what kind of chimney pipe to get.

IKI does not make chimney pipes for the US market but in this article, we list the parts you need for easy installation and links to where you can get them.

THE IKI STOVE PIPE

IKI wood-burning heater’s stove pipe that stick out from top of the stove is 4 inches in outer diameter.

IKI CHIMNEY ADAPTER

Because the US chimneys have a standard diameter of 6 inches instead of 4, IKI manufactures a chimney adapter piece for easy installation. The IKI chimney adapter converts the IKI stove pipe from from 4  to 6 inches.

DURAVENT TELESCOPING DOUBLE WALL CHIMNEY

IKI recommends using the Duravent Telescoping Double Wall Chimney for easy installation. You can order one from any major hardware store such as Home Depot.

ATTN! Duravent has different sizes of telescope chimneys, 6DVL-68TA, so make sure you measure your sauna room height before ordering the chimney.

DURAVENT DOUBLE WALL CHIMNEY PARTS:

• 6DVL-68TA 8647 - 6" DVL - Telescoping Length 40" - 68"
• 6DT-FC 9458 - Replaces 9455 - 6" Finishing
• Collar with Adapter
• 6DT-FF 9451 - Flat Roof Flashing 
• 6DT-VC 9484 - Chimney Cap 
• 5DT-SC 9359 - Storm Collar 5" - 6" 
• 1A54H222 VENT PIPE BLACK - 12 oz. 12/Pack 

FOR THE CEILING INSIDE THE SAUNA ROOM IKI RECOMMENDS USING:

• SELKIRK Supervent® 6" ID Class A
• Double Wall Decorative Ceiling Support 
• Model Number: JSC6DCSS